{"product_id":"osmo-431-uv-extra-protection-oil-light-cedar","title":"Osmo 431 UV Extra Protection Oil - Light Cedar","description":"\u003cp\u003eOsmo UV-Protection Oil Tints is a satin, natural oil-based finish ideal for use on all vertical wood surfaces in outdoor areas. Recommended for use on doors, windows, shutters, cladding, fences, pergolas, and summer houses. As a topcoat on already colour treated wood, Osmo UV-Protection-Oil Tints prolongs the renovation intervals significantly. As a single product application, it blocks the greying process on vertical surfaces with a UV protection factor of 12 in comparison to untreated wood when two coats are applied.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLight Cedar\u003c\/li\u003e\n\u003cli\u003eVery water and dirt resistant\u003c\/li\u003e\n\u003cli\u003eDoes not crack, peel, or flake\u003c\/li\u003e\n\u003cli\u003eResists growth of algae, mildew, and fungi\u003c\/li\u003e\n\u003cli\u003eLow odour\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"wpb_text_column wpb_content_element\"\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e\n\u003ch5\u003eSurface Preparation\u003c\/h5\u003e\n\u003cp\u003eWood surface must be clean, dry and frost-free (moisture content max. 20%). Ideally, surfaces are sanded no finer than a P120 grit grade of sand paper. Sanding to finer grades will reduce required absorbency.\u003cbr\u003eOsmo UV-Protection-Oil Extra is ready to use. Do not thin. Stir well using a flat stirring stick or spatula before use. If possible, and if the wood is an absorbent species, please apply the first coat to all sides before installation.\u003cbr\u003eFresh wood containing natural wood ingredients \/extractives (eg: Cedar, Larch, Teak, Mahogany or Iroko) are often less absorbent and need to weather off first before applying the product. Please refer to website ‘Suitability’ section for more details. Weathering helps ingredient rich wood become more absorbent and the wood finish adheres optimally. Weathering is also required if ingredient rich wood has been freshly sanded or renovated.\u003c\/p\u003e\n\u003cp\u003eA coloured base coat is recommended, e.g. Natural Oil Woodstain. Coloured base coats can improve UV protection.\u003cbr\u003eFor renovations, clean old microporous wood finishes thoroughly. De-grey any weathered bare wood with Osmo Wood Reviver Power-Gel before applying an Osmo exterior product.\u003cbr\u003eOld paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. To maintain absorbency, avoid sanding surfaces finer than a P120 grit. Weather ingredient rich wood after sanding.\u003cbr\u003eThe finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.\u003cbr\u003eSoft wood species like Pine or Spruce are more prone to blue stain, rot and insects. If desired, pre-treat these soft woods if possible on all sides with Osmo WR Base Coat.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wpb_text_column wpb_content_element\"\u003e\n\u003cdiv class=\"wpb_wrapper\"\u003e\n\u003ch5\u003eMethod of Application\u003c\/h5\u003e\n\u003cp\u003eWith Flat Brush or \u003ca title='Two Fussy Blokes 4\" Microfibre Smooth Roller Sleeves' href=\"https:\/\/www.paintonline.ie\/products\/4-inch-microfibre-roller-sleeves?_pos=1\u0026amp;_sid=95af737e6\u0026amp;_ss=r\"\u003eTwo Fussy Blokes 4\" Microfibre Smooth Roller\u003c\/a\u003e, apply thinly along the wood grain and spread well.\u003cbr\u003eAllow to dry for approx. 12 hours. Cooler temperatures, higher humidity levels or over application will delay drying. Once dry, apply the second coat thinly.\u003cbr\u003eWhen recoating colour treated surfaces, or for renovation works, one coat applied to the clean and dry surface is usually sufficient.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Osmo","offers":[{"title":"750ml","offer_id":53153338327376,"sku":"431C","price":35.95,"currency_code":"EUR","in_stock":true},{"title":"2.5L","offer_id":53153338360144,"sku":"431D","price":107.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/2817\/1093\/files\/unnamed-1.png?v=1781626480","url":"https:\/\/www.smythshomevalue.ie\/products\/osmo-431-uv-extra-protection-oil-light-cedar","provider":"Smyth's Homevalue","version":"1.0","type":"link"}